Application Procedures

HVAC Coil Cleaning

Why Clean HVAC /R Heat Exchanger Coils?

Dirt and debris accumulating on an air conditioner or heat pump coil blocks airflow across the coil, increasing the cost of heating or cooling the building. In severe cases, cooling or condensing coils can become so blocked that air flow is seriously reduced, possibly also leading to an evaporator or cooling coil icing problem indoors, or an overheated, damaged compressor outdoors, or simply loss of cooling capacity of the system.

In addition, a blocked evaporator coil can cause the HVAC compressor to run at higher than normal temperatures, a condition that over time can break down lubricants circulating inside the system, thus shortening the life of the compressor motor itself.

The Solution

ecoClean™ HVAC1.6RTU is a RTU (Ready To Use) cleaner that is formulated for the removal of dust and dirt from HVAC evaporator coils. It is made entirely from plant extracts, and is totally harmless to the environment. There is no fear of drifting in the wind, inhalation by the contractor, or spillage on the roof.

ecoClean™ HVAC1.6RTU comes in a convenient 2 1/2 gallon jug, sufficient for filling the tank on most HVAC spraying equipment.

ecoClean™ HVAC1.6RTU Benefits

·       100% plant based, safe for humans and the environment

·       Hypoallergenic, Non-Carcinogenic

·       Non-Toxic, Non-Hazardous, Readily Biodegradable

·       Non-Fuming, Low-Foaming

·       Flexible, can be used for a multitude of other cleaning applications

Application Procedures

1.     Spray the A/C or heat pump coil surfaces with ecoClean™ HVAC1.6RTU

2.     Let it soak in for 15 minutes but not long enough to dry out

3.     Rinse the coil and coil fins clean

4.     Remove spillover and debris from the condensate pan where your spray and debris

    lands